
AIR CRAFT CLEANING
AIR CRAFT CLEANINGHow to Dry Wash Aircraft
Materials to be used includes: Nupol, New Glaze Seal,NupowerII
Nupol:- Heavy Duty Cleaner, Used for Dry Washing.
Application- Rub, Dry,Buff
Procedure-
Apply Nupol 3-4 drops on Mop head applicator
Apply firmly while Moving Upwards and down
When applied allow to dry for 5-10 mins
Remove by Buffing out with a clean Mop head or a dry Terry towel
Nupol is used to clean, restore and protect
Nupower II:-Dry Wash Cleaner, UV protectant
Application-Apply, Dry, Buff
Procedure-
Apply Nupower II on Mop header applicator
Apply on the surface, agitate a small area evenly with the product
Allow to dry 5-10 mins, it will haze over
Buff out with a clean Mop head or dry terry towel or a clean bonnet
New Glaze Sealant:-Sealant, Ceramic Coating
Application-Apply,Buff,Dry
Procedure-
Apply in a humid condition
Apply on the surface, use a Mop header or dry terry towel or clean bonnet
Agitate a small area to a thin layer
Allow to dry, it takes 20 min to dry but this depends on the humidity condition of the area
Airside Safety Awareness Hazards
Hazard is a situation or condition that could result in unfavourable outcomes.
Types of Aircraft Hazards
Engine Hazards
Propeller
Antannae
Engine Hazards
Jet Blast
Jet Intake
Jet Blast: This occurs as exhaust from the jet engine. Jet blast is the most severe hazard, exhaust from the jet engine could cause burns, blow over,make an individual suffer eye/ respiratory irritation.
Jet Intake: the jet fans creates a suction which is capable of pulling in Fod which is around the engine like nuts, bolts and unit lead devices.
What are Fods?
Fod stands for foreign object debris and is a substance, debris or article alien to a vehicle or system which would potentially cause damage. Fod are objects that are found on the run way such as baggage tags, suitcase, caster wheels, plastic coffee cups, tools, nuts and bolts, plastic bags, aluminium cans, plastic bottles, construction materials, aircraft parts, books, pens or pencils, mobile phones, Rocks or gravels.
Think of the infamous Airfrance flight 4590 concord crash at paris in 2000 that was caused due to a tire being punctured by rolling over a piece of metallic debris.
Fod cost the aerospace industry four billion dollars per year and injured workers, pilots and passengers.
Propellers: You can’t identify the direction of a propeller. when it is stationary do not move in front of it
Non-Aircrafts Hazards
Complacency
Distractions
Lack of Awareness
Lack of Familiarity, experience and knowledge
Ignorance
Pressure
Lack of resources
Lack of teamwork.
Take Assessment on Health and Safety (Aircraft Cleaning)
Take Assessment On Aircraft Cleaning Here